SolidWorks机械工程师网——最大的SolidWorks学习平台

标题: SolidWorks 异形孔向导问题 [打印本页]

作者: whutls    时间: 2013-1-6 15:45
标题: SolidWorks 异形孔向导问题
有很多客户反应在使用SolidWorks异形孔向导时,会报如下错误:
针对与于该问题请手动注册以下DLL文件, 手动注册的方式是, 运行 dos命令窗口后 先敲入 regsvr32 然后 把dll文件从windows 浏览器中 拽到 dos命令窗口内,如下 Regsvr32 "C:Program FilesCommon FilesSystemadomsadrh15.dll" 回车即可 . A necessary DLL(s) is not registered. The most common cause of this problem is the presence of an anti-virus program running during the installation of SolidWorks. The following DLLs must be registered in order for Hole Wizard favorites to function properly (the first two DLL files listed are the most likely cause): - "C:Program FilesCommon FilesSystemadomsadrh15.dll" - "C:Program FilesCommon FilesSystemOle DBOLEDB32.DLL" - "C:Program FilesCommon FilesMicrosoft sharedDAOdao360.dll" - "C:Program FilesCommon FilesSystemadomsadox.dll" - "C:WindowsSystem32msjetoledb40.dll" - "C:WindowsSystem32msjet40.dll" - "C:WindowsSystem32msjtes40.dll" 然后重启电脑
作者: dbcs456    时间: 2013-1-7 01:10
我按照你说的操作没有成功,烦请指点。报错如下

急求回复,谢谢!
作者: NMYDYXF    时间: 2013-1-8 04:40
顶,但是看不清那是什么




欢迎光临 SolidWorks机械工程师网——最大的SolidWorks学习平台 (https://www.swbbsc.com/) Powered by Discuz! X3.2