标题: 用数据说话 solidworks 的快捷键如何能提高效率 [打印本页] 作者: 466684882 时间: 2015-6-3 06:34 标题: 用数据说话 solidworks 的快捷键如何能提高效率 Life is full of shortcuts but those typically don't work out well for anyone. Well that’s not the case with SOLIDWORKS shortcuts. There are many places to use shortcuts in parts and sketches.
Think about how you create a model in SOLIDWORKS. You choose a sketch plane, start a sketch, find a sketch entity to use, add some dimensions, then extrude that sketch into a feature. You do this over and over again until the model is created. But during that process are you being as efficient as you can be? Are you using any SOLIDWORKS shortcuts? Well I hope you are.
When I’m teaching, I emphasis SOLIDWORKS shortcuts. I say they really will help get your design done quicker but I never really had any data to put behind it. So I figured that I would model the same part 2 different ways. One way I would model using my typical shortcuts and the other would be with none. I timed myself modeling both ways to see which one was faster. I also downloaded 2 tools to help track my mouse movements. One shows where my mouse has been with a black line and the other tracks the distance in feet that my mouse has traveled.
作者决定来个对比，用普通方式操作，和用快捷键操作，并找到两个工具可以记录鼠标指针的移动痕迹。事例文件如下
The first model I used my typical, everyday SOLIDWORKS shortcuts. These are some hot-keys (i.e. “L” for line & “D” for dimension), mouse gestures, and the shortcut tool bar (“S” key）
首先是使用快捷键的操作
It took me 226 seconds to model it and my mouse traveled 28 feet. That isn't too bad as a good base value. Here is what the mouse path graphic looks like.花了226秒完成建模，鼠标移动总位移28英尺。
fYou can see that my mouse really stayed in the middle of my screen right where my model is. I didn't need to move to the command manager for anything. 你也能看到鼠标指针的移动痕迹比较均匀对称
Now let’s look at the one where I didn't use any SOLIDWORKS shortcuts. I knew that this one would be slower and I would have a lot more mouse movement.下面是不使用快捷方式的操作，不用想，肯定慢
It took me 421 seconds to model it and my mouse moves 103 feet. Here is the mouse path graphic
! Q9 a/ F; X! q3 N% X7 N3 G) _4 A; J花了421秒完成建模，鼠标指针移动总位移103英尺。
As you can see, my mouse spent more time on the property manager and command manager than in the graphics area.正如你所看到的，鼠标指针大部分时间是在图形区域间移动。
Let’s take a look at the numbers. I can see that I had a savings of 46% in time and 73% in mouse movement by using SOLIDWORKS shortcuts. 让我们看看这些数字，我可以看到使用快捷方式节省了46%的时间和73%的鼠标指针位移。
作者: 小X大X 时间: 2015-6-3 06:39
数据对比 好贴子，感谢分享作者: 亽爱吃橘子■ 时间: 2015-6-3 06:41
省下来的时间干点啥好内作者: CooL魔 时间: 2015-6-3 06:42
论述的清楚明白作者: 海洋之星 时间: 2015-6-3 06:43
謝謝寂大提供資訊,
一大早的就在指導後輩真用心耶.作者: 魔狱 时间: 2015-6-3 06:45
想问题的时间都比建模的时间长很多，怎么破？作者: 吕玉龙 时间: 2015-6-3 06:49
厉害厉害作者: zhang666hui 时间: 2015-6-3 06:50
那可能是仅对专业绘图员，那些设计员还有蛮多时间在考虑产品的功能与设计方案的作者: vfror 时间: 2015-6-3 06:50
我倒觉得设计员更应该设置更多的快捷键。。。。
是像一下如果突然想到什么，想拿个圆画一下，直接按快捷键就上去了
但是如果找命令的话有可能打断思路。。。
我现在键盘上73个快捷键。。画草图根本不用点上面那个。。
只有用一些比较冷门的命令的时候才会上去点点，，平常工具栏都是摆设作者: 双眼皮的狼 时间: 2015-6-3 06:54
关键是机器得快，俺认为目前影响速度的因素主要是机器性能！作者: 61956845 时间: 2015-6-3 06:56
楼上是王道 但最关键的还是专业素养啊作者: fengdinghao 时间: 2015-6-3 06:57
This may be unfair. Unless two guys creatd same model. One is good at shotcut. Other one is good at mouse click.作者: 爱心001 时间: 2015-6-3 06:59
前两天，拿鼠标的手关节磨桌子，感觉非常不舒服。看来要用快捷键了，鼠标用了，手臂疼，不知道大家有无感觉作者: qq771973134 时间: 2015-6-3 07:00
这就是使用快捷键的优势作者: 383939710 时间: 2019-7-26 14:12
好东西，努力学习学习！
